PTZ Preset Commands

JideTech PTZ Camera Preset Command List

Use this reference to quickly check the preset commands for PTZ camera scanning, cruising, infrared control, human tracking, wiper control and other PTZ functions.

Download the PDF Version

JideTech PTZ Camera Preset Command List · PDF Format · English

View / Download PDF

PTZ Preset Commands

Enter or call the corresponding preset command through the PTZ control interface to activate the required function.

Function Command Remark
Preset 1–16 41 CALL
Preset 17–32 42 CALL
Turn on the Wipers 50 CALL Automatically turns off after 2 rotations
Cruise Stop Time: 2 Seconds 51 Preset
Cruise Stop Time: 4 Seconds 52 Preset
Cruise Stop Time: 6 Seconds 53 Preset Default
Cruise Stop Time: 8 Seconds 54 Preset
Cruise Stop Time: 10 Seconds 55 Preset
Human Tracking Mode: Guide Preset Point 92 Preset
Human Tracking Mode: Tracking Time 93 Preset + 20–255 Preset Default: 60 Seconds
Human Tracking Mode: Back Time Setting 94 Preset + 20–255 Preset
Human Tracking Mode: Open Guide Point Tracking 92 CALL
Human Tracking Mode: Open Cruise Tracking 93 CALL
Human Tracking Mode: Close Human Tracking 94 CALL Default: Closed
Start 360° Scan 99 CALL
Start Left-Right Scan 38 CALL
Delete Left-Right Scan 38 Preset
Set Left Position 35 Preset
Set Right Position 36 Preset
Restore Default Camera Settings 115 CALL / 40 Preset
Delete Preset 33 CALL
IR Auto 81 CALL
IR Open 82 CALL
IR Close 83 CALL
IR Sensitivity: Low 81 Preset
IR Sensitivity: Middle 82 Preset
IR Sensitivity: High 83 Preset
360° Scan Speed 111 Preset + N Preset N = 1–64
Set Cruise Stop Time 114 Preset + N Preset N = 1–254
Default: 6
Set Cruise Speed 115 Preset + N Preset N = 1–64
Default: 64
Important: Available preset commands may vary depending on the PTZ camera model, hardware version and firmware version. Please confirm compatibility before changing advanced PTZ settings.

Need Technical Support?

Please contact JideTech and provide your camera model, firmware version and a description of the function you need.